Vapesourcing.com - New Promotion and Arrival of Kits, Mods, Atomizers

Aici va puteti exprima parerile despre magazinele online si fizice din afara Romaniei.
Forum rules
In cadrul acestei sectiuni, utilizatorii sunt asteptati cu impresiile lor, pozitive sau negative, privitoare la magazinele de tigari electronice din afara Romaniei, dar:
- sunt asteptate pareri pozitive cat si negative
- nu se vor tolera reclamele ascunse
- incercati sa impartasiti experienta voastra, dar cautati sa fiti impartiali
vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

New Release | Advken Manta V2 MTL RTA

Post by vapesourcing » Tue Oct 08, 2019 12:31 pm

Guys, good day! This time we'll be covering the Advken Manta V2 MTL RTA. It may be a good pick if you like MTL vaping and are looking for a decent MTL atomizer. Ok, here we go!

Advken Manta V2 MTL RTA is the latest member in the Manta line up. Measuring 22mm in diameter, it can hold up to 2ml of e-juice and is refilled via the top fill cap, this is not very bad for a MTL RTA. The main selling point of this RTA is the four airflow options. You can select from side intake airflow, bottom intake airflow or a combination of both using the airflow ring on the base.
Image
When turned there is a symbol to indicate which mode is selected: "B" presents bottom airflow, "H" presents bottom and side-half open airflow, "A" means bottom and side – fully open airflow, and "S" means side airflow. The build deck is for a single coil with two posts and a clamp screw layout. The airflow as mentioned above either comes up from below the centre mounted coil or in through the side of the deck. All in all, you can't go wrong with the Manta V2.

Where to buy: https://vapesourcing.com/advken-manta-v2-mtl-rta.html

Parameters
Size: 22*41mm
Material: 304 stainless Steel
Thread: 510
Positive Post Pin: Brass Gold-Plated
Capacity: 2ml
Drip Tip: PEI drip tip
Colors: Black, SS

You may also like: smok tfv16 tank near me



vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

OVVIO Series X Disposable Pod Kit - Focuses on Every Detail

Post by vapesourcing » Wed Oct 09, 2019 5:47 am

If you're a fan of small pod system vapes, it's time to grab the OVVIO Series X Kit, which is powered by a built-in 350mAh battery and free of any buttons or screens to extend the battery life. There is a brand logo in the middle of the fuselage, which can double as a smart LED indicator. When the cartridge and battery are connected, the brand logo LED indicator will be always on.

Included in the OVVIO Series X Kit is a 1.8ml replaceable pod with unfillable pre-filled disposable pod cartridge and has a variety of flavors. You can determine the taste according to the color of the base, the Nicotine content of each flavor is different to meet your different demand for vaping. Unplug the silicon stick on the pod first before use, then wait 5sec and enjoy it. Moreover, the OVVIO Series X Kit has multiple protection for your safe vaping.

Image

Parameters:
Size: 115 * 20.4 * 10.1mm
Battery: Built-in 350mAh battery
Output Power: 8-10W
E-juice Capacity: 1.8ml
Charging: Type-C port
Protection: Short-circuit protection, atomizer protection, low-voltage protection

More information you can see https://vapesourcing.com/ovvio-series-x-kit.html

You may also like:
orion plus for sale

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

New Launch | Steam Crave Aromamizer Lite RTA V1.5

Post by vapesourcing » Wed Oct 09, 2019 7:01 am

Hey guys. Today let's first look at the Steam Crave Aromamizer Lite RTA V1.5. You shouldn't miss it if you are looking for a high-end RTA versatile for kinds of vaping. Ok, let's dive in.

Steam Crave Aromamizer Lite RTA V1.5 is the updated version of Aromamizer RDTA V2 and Supreme Lite. Measuring 23mm in base diameter, it can store up to 3.5ml or 4.5ml with different glass tubes. Base on end users' feedback and suggestions, a 4mm chimney adaptor and 2×1mm air inserts are added as accessories to make the airflow be right for MTL.
Image
For those who are not very skillful at coil building, this RTA is not hard to use as it comes with an easy single coil build deck. At last, the special side airflow system allows air to directly hit the coil, providing you with perfect flavors. Anyway, the Aromamizer Lite RTA V1.5 is an ideal device for MTL or restricted DTL vaping! 3 colors to choose from.

Where to buy: https://vapesourcing.com/steam-crave-ar ... -v1-5.html

Parameters
Diameter: 23mm
Capacity: 3.5ml (a 4.5ml extra glass tube included)
Tank Type: Single Coil RTA
Airflow peek: 2×1mm
Chimney adaptor high: 4mm
Thread: 510

You may also like: blotto vape near me

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

Moti One Pod System Kit - Enjoyment Beyond Just Flavor

Post by vapesourcing » Wed Oct 09, 2019 11:18 am

Each element works together to flavor your lifestyle with state-of-the-art elegance, the Moti One uses zinc alloy materials to create a durable and wear-resistant body. Smooth and polished in an appropriate way, the streamlined design makes it sleek and modern. With the extremely simple filling mechanism, you just need to insert the nozzle and use a little pressure to open the seal to fill. Adopting innovative Meta Tech Heating Technology, each drop of e-liquid is heated evenly so every hit is delicate and sufficient. Moti One is powered by a built-in 350mAh battery and can be charged with a USB cable. It offers more control and flexibility to fill your mood and nicotine needs so that you have more freedom to choose varied flavour.

Image

Parameters:
Dimensions: 66.8 × 28 × 14.4mm
Case Material: Metal + plastic
Power: Built-in 350mAh battery
Cartridge Capacity: 1.85ml
Evaporator Resistance: 1.0Ω
Output Power: 9-12.5W
Operating Mode: Power
Protection: Low/high resistance protection, overheating protection, short circuit protection, overcharging/overdischarge protection
Connector Type: Magnetic
Charging: Micro USB port
Charging Current: 0.3A

More information you can see https://vapesourcing.com/moti-one-kit.html

You may also like:
rpm rba

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

A Comparison Between Lost Vape Orion Plus & Nikola Antares

Post by vapesourcing » Wed Oct 09, 2019 11:25 am

In kinds of vape devices, which kind do you like best? If you're looking for a new pod system that utilizes replacement coils and offers multiple output modes, then you'll definitely want to check out the two devices in this article.

Firstly is the Lost Vape Orion DNA Plus Kit, it is the updated version of the Orion DNA GO. Powered by a built-in 950mAh Li-po battery, it can fire from 10-22W depending on the different coils used. For better performance, the chipboard inside has been upgraded. As a result, Orion Plus now has 5 alternate power settings and patent-pending temperature control technology. Additionally, there's a new 40W boost system that permits for a brief increase of power upon initial firing for faster vapor production.
Image
As for the pod, it can hold up to 2mL and features an easy top filling port. At the bottom of the mouthpiece is an airflow control ring, you may rotate it to set a MTL or DTL style vape or somewhere in between. Both the pods and coils of the DNA GO are compatible with the Orion Plus, but the previous pods and coils are recommended to be used only on the level 1 or level 2 power setting. Besides, Orion Plus has two new coil options. The first is a 0.25ohm mesh coil which would be best with standard e-liquids. Or, you may prefer the 0.5ohm regular coil which is more suitable for nicotine salt or other high nicotine e-liquids.

Then is the Cheap Nikola Antares. Powered by a huge 1200mAh internal battery, it can fire from 14-18W with three different voltage settings including Soft, Norm, and Hard. The LED indicator light around the fire button will let you know which mode you're currently in. Changing the mode is done effortlessly by simply clicking the firing button 3 times.
Image
As for the pod, it has an e-liquid capacity of 2ml and adopts a top filling design. Heating elements included in the package are two 0.6 ohm mesh coils, they can be replaced easily thanks to the "plug in and play" structure. Moreover, the airflow is adjustable to provide either a MTL or DTL vape experience, so you can freely use both nicotine salt vape juice and regular free base e-liquids. All in all, you won't go wrong to choose the Antares Kit.

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

Laisimo Forest Wolf Kit with Innovative Vibration Function

Post by vapesourcing » Thu Oct 10, 2019 5:51 am

Laisimo Forest Wolf Kit is an exquisite and portable pod system that can be easy to be put in bags or pockets. Wherever you go, it can be a good companion. It has a novel vibration function, each 15 inhales, one time vibration will occur. The device is powered by a built-in 1000mAh battery, which can be charged through the Type-C port with 1A charging current, greatly reducing the charging time. On the same side, there are three LED indicators to show the battery level.

Laisimo Forest Wolf features 2ml e-liquid capacity and convenient side-fill structure. Moreover, there are three cartridges available: MTL 1.3ohm ceramic, MTL 1.2ohm regular, and DTL 0.6ohm regular. To make a perfect tank for high viscosity oil, the kit adopts top notch materials with strong corrosion resistance and high temperature resistance to ensure cozy and safe vaping, and multiple protections to avoid potential risks.

Image

Parameters:
Size: 66mm * 40mm * 15mm
Pod Size: 35.5mm * 20.5mm * 13.5mm
Weight: 70g
Cartridge Weight: 10g
Battery Capacity: Built-in 1000mAh
E-liquid Capacity: 2ml
MTL Pod: 1.2ohm regular, 1.3ohm ceramic
DTL Pod: 0.6ohm regular
Standby Current: <18uA
Output Voltage: 3.4V
Charging Current: 1.0A
Case Material: Metal + plastic
Mouthpiece Material: PCTG
Connector Type: Magnetic
Charging Port: Type-C

More information you can see https://vapesourcing.com/laisimo-forest-wolf-kit.html

You may also interested in:
dovpo topside dual carbon mod

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

Coming Soon | UD Julia Pod System Kit 1300mAh

Post by vapesourcing » Thu Oct 10, 2019 8:29 am

Hey guys. Do you like personalized vape devices? Today let's first look at such a pod system named UD Julia Pod Kit. Ok, here we go!

UD Julia Pod Kit is extremely comfortable to hold in hand as it has a cozy rectangular body with rounded corners. Although developers from the start do not provide many color options for side panels, it is still suitable for both "serious" and personality users. Why? Because there is a version with a transparent removable panel, under which you can place any photos you like. Powered by a built-in 1300mAh battery, the device allows for three output power levels and can last quite a long time. Different power levels can be selected by pressing the side adjustment button.
Image
Above the button are three LED indicator lights, they will light up according to different power levels, one light means the power is low, two for medium, and three for high. As for the pod of this device, it has a capacity of 2ml and can be refilled from top, the filling port is hidden under a slider. There are two types of replaceable coils in the kit, one with a resistance of 0.8 ohms and the other with a resistance of 1 ohm. Unlike coils in other pods, they are mounted horizontally, very unique. At last, the device has an airflow adjustment switch on the other side, you can slide it to your preferences for different vaping needs.

Where to buy: https://vapesourcing.com/ud-julia-kit.html

Parameters
Dimensions: 98 * 45 * 16mm
Case material: plastic + metal
Battery: built-in 1300mAh
Cartridge capacity: 2ml
Coil resistance: 0.8/1.2ohm
Connector type: magnetic
Port: Micro-USB
Protection: against low/high resistance, from overheating, from short circuit, from overcharge/over-discharge

You may also like: smok p3 cena

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

Difference between OVNS JC01 Pod Kit and OVNS JC01 Pro Kit

Post by vapesourcing » Thu Oct 10, 2019 11:16 am

Are you familiar with OVNS JC01 Kit? Now here comes its updated version - OVNS JC01 Pro Kit, which comes with slim card-shaped appearance that is portable and comfortable to hold in hand. The kit integrates a 400mAh built-in battery, which can be charged via Micro USB port, providing longer vaping time and more massive vaper. With three LED indicators, you can check the battery level clearly: high (70-100%), middle (30-70%), low (<30%).

Compared to JC01, the JC01 Pro adds a new voltage adjustment function. There are three voltage modes: high, medium and low, meeting your different vaping needs. It features developed ceramic coils, which produce the purest flavor and better throat hit feeling. Moreover, this pod provides the security of your vaping with six protection functions, including low resistance protection, output short-circuit protection, charging protection, high resistance protection, over-time protection.

JC01 Pro has three differences with JC01. The first is the difference in function: JC01 Pro comes with adjustable voltage, while JC01 has a constant voltage system. The second is the difference in size: JC01 Pro is a little larger. The third is the difference in E-juice capacity: JC01 Pro is 1ml, larger than 0.7ml of JC01, will bring longer vaping experience.

Image

Parameters:
Size: 42mm * 67mm * 9.5mm
Battery: Built-in 400mAh
Cartridge Capacity: 1.0ml
Coil Resistance: 1.5ohm (Cotton)
Charging: Micro USB

More information you can see https://vapesourcing.com/ovns-jc01-pro-kit.html

You may also interested in:
smok novo 2 pods for sale

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

New Offer | Code "Fetch40" For $25.69 SMOK Fetch Mini Kit

Post by vapesourcing » Thu Oct 10, 2019 12:43 pm

Guys, good day. Have you been waiting for a cheap Fetch SMOK for a long time? Here comes a piece of good news. From now on, you can get the Fetch Mini at the price of $25.69 with the discount code "Fetch40". There is no time like the present, just snap it up!

Get it here: https://vapesourcing.com/smok-fetch-mini-kit.html
Image

Main features
1. 1200mAh internal battery and 3.7ml Pod capacity
2. The panels on both sides feature 2.5D arc edge glass
3. Laser UV transfer texturing technique
4. Waterproof & Dustproof Chamber
5. Variable wattage support up to 40W
6. Fit for SMOK RPM Series and Nord Series Coils

You may also like this: rpm40 vape cena

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

Hippovape Kudos Mod - A New Choice for Squonking

Post by vapesourcing » Fri Oct 11, 2019 6:19 am

Squonking is officially taking the world by storm, also Squonk mods have grown in popularity. If you don't already own a Squonk mod, add this Kudos Mod to your purchase list, which is an 80w squonk mod designed by Hippovape. The Hippovape Kudos Mod is powered by external single 18650 battery with Type-C fast charging, to achieve a power range from 3W to 80W, which fires extremely fast. At the same time, the use of advanced waterproof chipset brings better and more stable performance for the device.

The Kudos Mod features 4 different output modes: power mode, voltage mode, temperature mode, and bypass mode, for your selection. It has a 7.5ml bottom squonk bottle for ample juice storage, together by the working of the slide-to-refill system for convenient and efficient refilling. To prevent from leakage problem, the mod also adopts a feeder tube lock system, so you can use it with confidence.

Image

Parameters:
Diameter: 79mm * 43mm * 25mm
Battery Type: Single 18650 battery (not included)
Power Output: 3-80W
Voltage Range: 1.0-8.0V
Resistance Range: 0.1-3.0ohm
Squonk Bottle Capacity: 7.5ml
Connector: 510
Display: 0.49 inch screen
Material: Zinc alloy

More information you can see https://vapesourcing.com/hippovape-kudo ... r-mod.html

Recommended products:
aegis x mod for sale

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

Guides To The Horizon Falcon II Sub Ohm Tank 5.2ml

Post by vapesourcing » Fri Oct 11, 2019 8:21 am

Hey guys. Are you a fan of the Falcon series sub ohm tanks? If so, then you shouldn't miss the Horizon Falcon 2 Tank we'll be covering in the following. Ok, here we go!

Horizon Falcon 2 Tank is the latest member in the Falcon line up to date. Measuring 25mm at the base, it can store up to 5.2ml or 3.4ml e-liquid with different glass tubes used, and the e-liquid can be easily refilled via the top filling structure. Heating elements in the package are two 0.14ohm Sector Coils, one pre-installed and the other for spare.
Image
The fan-woven mesh heating wire in the coils can maximize the airflow of the bottom coil, combined with the bottom-up coil heating, forcing the smoke to compress upwards, forming a vapor compression path and making the flavor denser and the vapor more smooth. Moreover, HorizonTech optimizes the coil change method: the former coil is threaded and must be replaced after the juice is completely used up, now simply unscrew the base and pull the atomization core directly without smudging the hand. Plus the accurate adjustable bottom airflow system, the Falcon II Tank is no doubt a must-have for DTL vaping.

Where to buy: https://vapesourcing.com/horizon-falcon-2-tank.html

Parameters
Tank Length: 56mm
Excircle Diameter: 25mm
Glass Tube Diameter: 28mm
Capacity: 5.2ml / 3.4ml(Glass Tube)
Coil Option: Falcon 2 Sector Mesh Coil
Coil Resistance: 0.14ohm
Wattage: 70-75W
Fill: Top-filling system
Connection: 510
Material: Stainless Steel (Body) + Pyrex Glass (Tank) + Resin (Drip Tip)

You may also like: voopoo find trio cena

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

Veiik Cracker Pod Kit with Leather or Tempered Glass Panels

Post by vapesourcing » Fri Oct 11, 2019 10:32 am

Portable in size, cookie appearance, strong battery, amazing flavor, the Veiik family launched a new mini cube pod device - Veiik Cracker Pod Kit, which adopts high-quality zinc alloy and food-grade PCTG materials. Veiik Cracker integrates leather or 2.5D tempered glass panels with variable colorful patterns for a high-end look and gives you more options. Powered by 500mAh built-in battery, it ensures long-lasting suction. With a buttonless design, Veiik Cracker Kit adopts air-driven system for easy inhaling. Plug the 2.0ml refillable pod, it is ready to meet your daliy use. Together with 1.2ohm ceramic coil, Cracker will deliver you excellent flavor.

Image

Parameters:
Dimensions: 54 × 45 × 13.2mm
Case Material: Zinc alloy + plastic + glass
Power: Built-in 500mAh battery
Cartridge Capacity: 2.0ml
Evaporator Resistance: 1.2Ω
Power Range: 8-15W
Operating Mode: Power
Protection: Low/high resistance protection, overheating protection, short circuit protection, overcharge/overdischarge protection
Connector Type: Magnetic
Charging: Micro USB port

More information you can see https://vapesourcing.com/veiik-cracker-kit.html

Recommended products:
drag 2 vape for sale

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

First Look | Vsticking VKsma Kit 1400mAh

Post by vapesourcing » Fri Oct 11, 2019 10:58 am

Guys, good day. Have you ever used vape devices with auto-squonking system? This time let's look at such a pod mod vape named Vsticking VKsma Auto Squonk Kit. Ok, here we go!

Vsticking VKsma Kit uses the advanced YiHi SX638H Chipset. This chipboard features an integrated ESS driver (Electronic Spray Squonker) that automatically sprays e-liquid into the coil for supporting atomizers such as the ADA(Auto Dripping Atomizer). In traditional pod systems, you may often find that if the coils are not properly saturated, you may experience a dry hit. The Vsticking VKsma does not have this problem thanks to its ESS spray technology and its chipset which senses when the coil has become too hot. In the latter case, the device will not fire. Inside the device, there's an internal 3ml tank that resides in a 100% sealed chamber to limit any leakage. You may always feel safe when carrying this small pod setup.
Image
Powered by a built-in 1400mAh battery, the Vsticking VKsma can last a long vape time and allows for two working modes including Auto mode & DIY mode. In Auto mode, the SMA ADA will be detected automatically, but you may also set the mod to the DIY mode for use with the rebuildable SMI RADA. Looking at the picture, you can see that the ADA is built with adjustable airflow control which is done by pivoting the airflow cap. While in Auto mode, the Vsticking VKsma will intelligently pump e-juice based on its density, but you may also adjust it to your liking. And, there are also two power output settings (P1/P2). Anyway, the Vsticking VKsma is ideal for kinds of vapers.

Where to buy: https://vapesourcing.com/vsticking-vksma-kit.html

Parameters
Size: 79 * 47.5 * 18.6mm
Battery Capacity: 1400mAh
E-liquid Container Capacity: 3ML
Working modes: Auto Mode (5-25W), DIY Mode (10-35W)
Auto Modes: 0.3QNi211 P1 (10-15W) / P2 (20-25W); 1.0QSS316 P1 (5-6W) / P2 (10-12W)
DIY Mode: 10-35J
Output Voltage: 1.73V-3.5V
Temperate Control Range: 180-260°C (356-500°F)
Charging Voltage and Current: Standard DC 5V/1A
Material: Zinc Alloy
Display: 0.69" OLED

You may also like: vapresso gen cena

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

In Stock - Joyetech EXCEED X Kit 1000mAh

Post by vapesourcing » Sat Oct 12, 2019 8:07 am

Hey guys, have you been looking forward to using the Joyetech EXCEED X Kit as soon as possible? You don't have to wait any longer, it is already in stock on our website now and offers multiple colors for your choice. The EXCEED X Kit is powered by a 1000mAh internal battery with Type C fast charging port, and only takes 30 minutes to fully charge the device. It features three adjustable power levels, which can be monitored by the LED indicator, which can also show the battery capacity. The kit is compatible with all EX series coils, including EX 0.5ohm coil, EX-M 0.4ohm coil and EX 1.2ohm coil, opens a new vaping experience of customization. Moreover, the Exceed X atomizer with 1.8ml of e-juice contains a childproof filling system, making the filling more efficient and secure.

Where to buy: https://vapesourcing.com/joyetech-exceed-x-kit.html

Image

Features:
• Powered by 1000mAh built-in battery.
• 2A fast charging via Type-C port.
• 1.8ml e-juice capacity.
• Compatible with all EX series coils.
• Three adjustable power levels.
• Large ignition button.
• Childproof filling system.
• Multiple protections: over charging, over discharging, short circuit, timeout, over current, resistance detection.

You may also like:
smok vape novo cost

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

Which DTL Kit Is Better? SMOK MAG P3 Or MAG?

Post by vapesourcing » Sat Oct 12, 2019 8:29 am

Hey guys. Are you a fan of devices by SMOK? Among kinds of SMOK devices, which series do you like best? I like the MAG series best, so in the following, I'm gonna make a comparison between two vape mod kits of MAG series. Just take a look and maybe you'll need them.

We first look at the SMOK MAG P3 Kit. It is an update to the legendary MAG lineage, featuring intricate child safeties, IP67 rating, and is equipped with an extensive temperature control suite to help dial in the ideal vaping settings to create delicious clouds of vapor. Built from zinc-alloy, the chassis of the MAG P3 Mod is impervious to falls and drops and has a reliable locking system to prevent underage usage.
Image
Underneath the box mod, located at the base is a hinged battery door, preserving the upper firing wattage output of 230W. Utilizing dual batteries set up, the MAG P3 Mod can utilize a pair of high-amp batteries to work in conjunction with the proprietary chipset to unlock a magnificent temperature control suite with plenty of items and wire coefficients. As for the TFV16 Tank, you guys should have been familiar with it, so we won't waste time on it here.

Then is the SMOK MAG 225W Kit. The design of the MAG Mod is made with a futuristic control face along the trigger-inspired chassis, streamlined with a comfortable palm rest and an oversized firing switch. Moreover, battery installations of the dual high-amp 18650 is opened via a flower-shaped button located on the side of the face, allowing access to the sliding battery compartment.
Image
And there is a customizable and user-friendly full-color OLED screen that provides essential data at a glance with vibrant displays. Finally, the MAG features a maximum output of 225W and a plethora of output adjustments ranging from temperature control suite with added Memory Mode for increased precision as well as full-suite of protection.

Post Reply