Vapesourcing.com - New Promotion and Arrival of Kits, Mods, Atomizers

Aici va puteti exprima parerile despre magazinele online si fizice din afara Romaniei.
Forum rules
In cadrul acestei sectiuni, utilizatorii sunt asteptati cu impresiile lor, pozitive sau negative, privitoare la magazinele de tigari electronice din afara Romaniei, dar:
- sunt asteptate pareri pozitive cat si negative
- nu se vor tolera reclamele ascunse
- incercati sa impartasiti experienta voastra, dar cautati sa fiti impartiali
vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

New Launch | Augvape Intake Dual RTA 26mm

Post by vapesourcing » Tue Sep 10, 2019 11:26 am

Hey guys. Do you know the Augvape Intake RTA? Or have you imaged a dual coil version? Because of the huge success of the single-coil Intake and the demand for a dual coil version, the Augvape Intake Dual RTA has emerged.

Augvape Intake Dual RTA is the Dual Coil project by Mike Vapes and Augvape. Measuring 26mm in base diameter, it can store up to 4.2ml of e-juice with a straight glass tube and 5.8ml with a bubble glass tube. Moreover, the Intake Dual comes with convenient top e-juice refill design, simply screws out the top cap to reveal the large dual filling holes, inject your favorite e-juice without leaking.
Image
In order to get more airflow while keeping the diameter 26mm, the airflow is from the top and get through the chimney, then blow the coil from side and bottom, will deliver the large cloud of vapor and amazing flavor. At last, the Intake Dual features a postless building deck and offers a coil tool for customers to cut the coil lead, so the coils will be in the perfect position to work great.

Where to buy: https://vapesourcing.com/augvape-intake-dual-rta.html

Parameters
Diameter: 26mm
Capacity: 4.2ml(Straight Glass) / 5.8ml(Bubble Glass)
Coil Building: Dual Coil
Filling: Top refilling
Color: Black, Gunmetal, Rainbow, Silver

You may also like: suorin plus near me



vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

Guides To The 200W GeekVape Aegis X Mod

Post by vapesourcing » Wed Sep 11, 2019 6:13 am

Hey guys. Do you like the Geekvape Aegis X Kit? Some of my friends told me they'd like to buy the mod separately so that they can use their own atomizers on this mod. Here comes good news, the Geekvape Aegis X Mod is available in vapesourcing online store now. In the following are more details.

Geekvape Aegis X Mod is the latest in the Aegis mod line up. It has received a rating of IP67, preventing dust and water from affecting the electronics and hardware of the Aegis X. Powered by dual 18650 batteries, it can output up to 200W and you get Variable Wattage, Temperature Control and taste modes (soft, standard and powerful).
Image
Running all this is the Geekvape AS 2.0 chipset which promises a faster firing time, stable power output and precise temperature control features. The temperature control suite has compatibility with nickel, titanium, and stainless steel wire compatibility. Another massive difference is the 2.4" OLED side-mounted screen, it is huge enough to show the essential vaping data vividly. Anyway, the Aegis X Mod is a must-have for high-quality DTL vaping.

Where to buy: https://vapesourcing.com/geekvape-aegis-x-mod.html

Main features
1. 2.4" OLED display screen
2. New AS 2.0 chipset for outstanding accuracy and stable power output
3. IP67 waterproof, shockproof and dustproof function
4. Optimized button positions for single-hand operation
5. Up to 6 high-grade materials to improve durability and user experience
6. Innovative battery balancing charging with a battery protection

You may also like: smok fetch cena

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

OBS Alter Pod Kit - Meet The Pleasure of MTL and DTL Vaping

Post by vapesourcing » Wed Sep 11, 2019 6:38 am

As an all-in-one device, OBS Alter Pod Kit with magnetic connection for easy installation, and 2.5D toughened glass on the side panels for comfortable grip and durability. Powered by a built-in 2500mAh battery, it can be charged via the Type-C port with 1.6A current. On the side, there is an OLED display screen for showing the detailed vaping data clearly. On the other side, there is a small liquid window to let you know the current level. The max output is 70 watts, you can use the up and down button to adjust the working wattage and press the round fire button to enjoy the vaping.

To meet the demands of both MTL (mouth to lung) and DTL (direct to lung) vapers, the kit is designed with two different airflow bases for the various coils - the sub-ohm base that is compatible with 0.2ohm M1 coil and 0.15ohm M3 coil, and the nic salt base that is compatible with 1.4ohm NX coil and 0.15ohm SX coil. The nic salt base comes with dual airflow adjustable slots to let you adjust the air by rotating the base. Utilizing the convenient top e-juice refill design, you can just press the triangle button to slide out and reveal the large filling hole, without leaking worry.

Image

Parameters:
Dimensions: 85 × 43 × 24mm
Case Material: Zinc alloy + plastic
Battery: 2500mAh internal
Cartridge Capacity: 2/3.5/5ml
Evaporator Resistance: 0.15/0.2/1.4Ω
Output Power Range: 5 - 70W
Working Voltage: 3.3 - 4.2V
Resistance Range: 0.15 - 3.0Ω
Coils: M1 (0.2ohm, 50 - 70W), M3 (0.15ohm, 50 - 70W), NX (1.4ohm, 8 - 12W), SX (0.15ohm, 20 - 25W)
Operating Mode: Power
Protection: Low/high resistance, overheating, short circuit, overcharging/overdischarge
Connector Type: Magnetic
Charging: Type C USB port, 1.6A charging current

More information you can see https://vapesourcing.com/obs-alter-kit.html

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

AAAVape Anulax Sub Ohm Tank with Three Coil Options

Post by vapesourcing » Wed Sep 11, 2019 11:54 am

AAAVape Anulax Sub Ohm Tank is designed to appeal to most any vaper with features such as hinged top fill system, dual slotted bottom airflow control ring, and has access to AAACigs Anulax coil family. It has a diameter of 24mm and 28mm at widest point, easily fits many different vape mods.

Opened by the press of a button, the Anulax Sub Ohm Tank possesses a hinged top fill system that reveals two fill ports on either side to reduce the positive pressure within while refilling top fruit e-liquid. In addition, the slightly knurled airflow control ring at the base features dual slots for easy manipulation to adjust the proper amount of airflow reaching the coil.

From gusty draws to a more restricted airflow pull, the Anulax can use proprietary coils from AAA Vapor to further tailor the vaping experience to your preference. As a cloudy sub ohm tank, Anulax has plenty of coil options to choose from - a 0.15ohm mesh coil, a 0.2ohm triple coil, and a 0.2ohm flat coil, to create ideal vape that suits any preference.

Image

Parameters:
Diameter: 24mm (base)/28mm (bubble glass tube)
Length (including mouthpiece): 52.6mm
Net Weight: 54g
E-liquid Capacity: 5ml (bubble glass tube)/3ml (straight glass tube)
Thread: 510
Drip Tip: 810 Delrin
Material: 304 stainless steel + quartz glass reinforcement
Resistance & Suggested Coil Wattage: 0.15ohm AMC mesh coil (50 - 60W), 0.4ohm AFC triple coil (55 - 65W)

More information you can see https://vapesourcing.com/aaavape-anulax-tank.html

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

What Are The Advantages Of Oumier Wasp Nano MTL RTA?

Post by vapesourcing » Wed Sep 11, 2019 11:59 am

Guys, good day. Still remember the Wasp Nano RTA and the Wasp Nano RDTA by Oumier? This time we'll be covering the Oumier MTL RTA Wasp Nano---the new MTL version of these successful Wasp Nano atomizers.

Oumier Wasp Nano MTL RTA is created to cater for those vapers who prefer higher resistance coils, more airflow restriction, and higher nicotine / nicotine salt e-liquid. Measuring 22mm in base diameter, this RTA can hold up to 1.2ml of e-juice with a straight glass tube and 2ml with a bubble glass tube. On the base of the RTA is the adjustable airflow ring to give you plenty of airflow options to suit your preference.
Image
The airflow enters the tank through the base inlets and then travels to the coil on the deck. Talking of the deck, it is wide enough for easy single coil building with two posts. At last, there is an easy top refilling cap. Just rotate the top cap 90 degrees anticlockwise to reveal the filling port, and then you can refill the e-juice effortlessly.

Where to buy: https://vapesourcing.com/oumier-wasp-nano-mtl-rta.html

Parameters as below
Size: 22mm * 40.9mm
Capacity: 2ml
Coil: Single Coil
Drip Tip: 510
Fill: Top-refilling
Color: Gold, Black, SS

You may also like: smok mag p3 near me

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

Aspire K Lite Mod - As Powerful As You Expect

Post by vapesourcing » Thu Sep 12, 2019 6:28 am

Although coming initially as a kit with the Aspire K Lite Tank, Aspire K Lite Box Mod can match with most 510 threaded tanks. Constructed from zinc-alloy material, the chassis of the Aspire K Lite is lightweight and impact-resistant, guarding the internal 900mAh rechargeable battery, which can be charged via the Micro USB charging port located at the bottom of the device. While charging, the LED will illuminate to indicate the state of charge.

It features 5 voltage outputs to help you find the perfect output level to match the attached atomizer or tank. You can adjust the voltage from 3.0V to 5.0V simply by pressing the mode button. Situated in the middle of the exterior chassis, the K Lite possesses a 0.69 inch OLED display screen to show you the crucial vaping data. Finally, this mod comes with multiple safety features to make you use with confidence, such as overheating protection, overcharging protection, low voltage protection, short circuit protection, and automatic cutoff.

Image

Parameters:
Size:75mm * 26.5mm * 17mm
Battery Type: Built-in LiPo
Battery Capacity: 900mAh
Port: Micro USB
Power Options: 3.0V, 3.5V, 4.0V, 4.5V, 5.0V
Resistance Range: 0.8ohm - 3.0ohm
Thread: Threaded 510 connection
Material: Zinc-alloy chassis construction

More information you can see https://vapesourcing.com/aspire-k-lite-mod.html

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

New Release | GeekVape Aegis Squonker Kit 100W

Post by vapesourcing » Thu Sep 12, 2019 8:15 am

Hey guys. Do you still remember or have you ever used the squonk kits by Geekvape? Today, let's first look at the Geekvape Aegis Squonker Kit---the latest squonk device by Geekvape, also the latest device of Aegis series to date. Ok, here we go!

Geekvape Aegis Squonker Kit comprises of the Aegis Squonker Mod and the TENGU RDA. From the Aegis name, we can infer that the mod is waterproof, dustproof, and shockproof. Powered by a single 18650 battery, it is constructed with the AS-100 chipset to produce stable and sound operation with up to 100W of output. Modes are wide-ranging and include curve mode, power mode, temperature control mode, TCR mode. The control face of the mod is built with a single power button and two adjustment buttons.
Image
In the middle, there's a monochrome screen that shows vape data vertically. Indicators include current mode, power/temperature, a battery bar for the single cell that powers the setup, coil resistance, current amperage, current voltage, and puff counts. At the back of the mod, there's an interchangeable pump that directs juice to the atomizer when pressed. This section can be swapped out for a non-squonk piece if preferred. Removal of the pump section permits accessing the silicone juice bottle which can be effortlessly removed for filling. As for TENGU RDA, it has been on the market for a long time, so we won't cover it in detail here.

Where to buy: https://vapesourcing.com/geekvape-aegis ... r-kit.html

Parameters
Aegis Squonker Mod
Material: Zinc-Aluminium Alloy Chassis Construction + Rubberized Exterior Edge
Size: 86.4mm * 41.2mm * 31.5mm
Battery: Single High-Amp 18650 Battery (Not Included)
Wattage Output Range: 5-100W
Resistance Range: 0.05ohm-3.0ohm
Modes: Power/TC(Ni,Ti,SS)/TCR/VPC/BYPASS
Temperature Range: 100°-315°C / 200°-600°F
Colors: Green, Blue, Orange, Red, Gunmetal, Black

TENGU RDA
Material: Superior Stainless Steel Construction
Diameter:24mm
Coil Configuration: Single or Dual Coil
Airflow: Side to Coil Airflow

You may also like: cheap voopoo vinci r

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

IJoy Mipo Pod - Perfect Travel Companion with Charging Box

Post by vapesourcing » Thu Sep 12, 2019 10:43 am

As one of the smallest e-cigarettes in the world, the IJoy Mipo Pod System is called as "Pocket Magic". It is powered by a 190mAh battery and equipped with a 1000mAh charging box, which can recharge the device about five times. When the Mipo runs out of power, you simply put it into the charging box to start charging. The kit includes three cartridges with different coil resistances and an innovative air-activated pod system to meet different atomization requirements. You can also place 3 extra replacement pods inside the box if you want to switch flavors or just as a backup.

Image

Parameters:
Device Battery Capacity: 190mAh
Case Battery Capacity: 1000mAh
Case Dimensions: 82.5mm * 48.2mm * 25.9mm
Device Dimensions: 56.7mm * 17.3mm
Resistance: 1.8ohm
Coil Type: Ceramic
Juice Capacity: 1.1ml
Output Wattage: 7.5W Max
Voltage Range: 3.2V - 3.7V

More information you can see https://vapesourcing.com/ijoy-mipo-kit.html

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

What Are The Advantages Of Aspire Odan Mini Sub Ohm Tank?

Post by vapesourcing » Thu Sep 12, 2019 10:53 am

Guys, good day. This time we'll be covering the Aspire Odan Mini Tank. You shouldn't miss it if you are looking for a well-crafted sub ohm tank. Ok, let's dive in.

Aspire Odan Mini Tank is a premium sub ohm tank with an elegant look. Measuring 25mm in base diameter, it can store up to 4.5ml of e-juice with a diamond cut crystal tube. The tube is delicately curved with high-tech machining, not only does it sparkle but gives stronger, and more heat-resistant features than regular glass. In airflow control respect, Aspire has combined a smart internal structure and special airflow channel into one system. In one second after firing the button, this new system will quickly provide massive vapor and flavor production, which is far better than other similar sub ohm tanks.
Image
Heating elements included in the package are a preinstalled 0.3ohm Mesh Coil and a spare 0.2ohm Mesh Coil, these coils have a combination of wicking material – 80% Linen Cotton (high-temperature resistance and anti-bacterial) and 20% Organic Cotton (high liquid rate absorption). Moreover, the Odan Mini has a Plug and Play easy coil system that makes coil replacement super simple—replacing a coil has never been so easy. At last, Aspire integrated an e-liquid shutoff valve to prevent e-liquid from getting into the coil chamber while you swap coils. This means you don't need to worry about e-liquid spilling out while changing your coils. Anyway, the Odan Mini is worth a shot!

Where to buy: https://vapesourcing.com/aspire-odan-mini-tank.html

Parameters
Dimension: 57.5mm x 25mm
Juice Bottle: 5.5ml (Standard)/4ml (Diamond)
Coil Type: 0.2ohm Mesh Coil (50-60W), 0.3ohm Mesh Coil (35-45W)
Thread: 510 Connection
Fill: top filling system
Drip Tip: 810 Honeycomb Resin Drip Tip

You may also like: smok fetch mini near me

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

What Are The Features Of BD Vape Precisio MTL Pure RTA?

Post by vapesourcing » Mon Sep 16, 2019 8:54 am

Hey guys. Today I'm first gonna bring a new RTA by BD VAPE. It is named "Precisio" and precisio is the abbreviation of precision. So from its name, we can see this is a very precision device.

BDvape Precisio MTL Pure RTA is a solid vape sprayer mainly manufactured from stainless steel. Measuring 22mm in diameter, it can hold up to 2.7ml of e-liquid. The dripping hole on the top is so big that you can top fill very easy. Inside the RTA, there is a user-friendly deck with two posts, which makes it very easy to build. And the dome of the heating chamber can effectively condense the vapor, offering you more intense flavor.
Image
Moreover, Precisio's airflow can use from MTL to middle DL, you can choose your favorite style, and the double airflow hole inside can give the air more power and a direct blow to the coil, make the flavor more strong and clear. That is, the Precisio MTL perfectly combines the MTL and DL Function together to meet your most vaping need. All in all, the Precisio is definitely worth a shot!

Where to buy: https://vapesourcing.com/bdvape-precisio-rta.html

Parameters
Material: SS304
Size: 22.0 * 52.7mm
Resistance: DIY Coil, MTL Style
Type: 2.7ml Standard Edition
E-juice Capacity: 2.7ml
Drip Tip Connector: 510
Battery Connector: 510

You may also like: geekvape aegis x near me

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

First Look | Hellvape GRIMM Pod System Kit

Post by vapesourcing » Mon Sep 16, 2019 11:15 am

Guys, good day! This time let's look at the Hellvape GRIMM Kit Vape---the latest pod system by Hellvape to date. It would be a good pick if you are in hunting for a high-end device for vaping on the go. Ok, here we go!

Hellvape Grimm Kit is a collaboration among Hellvape, Grimm Green and Ohm Boy. Built with protective zinc-alloy and PCTG materials, it is moderately impact-resistant, preventing unsightly markings from damaging the box mod. Powered by a built-in 1200mAh battery, the Grimm can fire in both a wattage and voltage output, reaching up to 4.6V and 30W, respectively. Moreover, there is a bright OLED display screen on the side, which will show the detailed vaping data clearly and bring you convenient operation.
Image
As for the pod, it can hold up to 2ml of e-liquid and can be easily refilled via its sliding top fill structure. Heating elements included in the package are a pre-installed 0.7ohm H3-01 Mesh Coil and a 1.2ohm H3-02 Regular Coil. With them, the Grimm can meet your different vaping needs effortlessly. Plus the adjustable airflow design on the bottom of the pod, the GRIMM is no doubt a must-have for all vapers.

Where to buy: https://vapesourcing.com/hellvape-grimm-kit.html

Parameters
Dimensions: 93 * 44.5 * 19mm
Battery: 1200mAh internal battery
Wattage Output Range: 5-30W
Voltage Output Range: 0.5-4.6V
Resistance Range: 0.7ohm / 1.2ohm
Material: Zinc-Alloy + PCTG
E-juice Capacity: 2.0ml
Screen: OLED Display Screen
Refill: side filling system
Coils: Hellvape GRIMM Coil Series
Resistance: 0.7ohm H3-01 Mesh Coil, 1.2ohm H3-02 Regular Coil
Airflow: Based Airflow Control
Connection: Snap-In Pod Connection

You may also like this: voopoo find s trio kit cena

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

Innokin I.O Kit with Two Pods for Different Eliquid

Post by vapesourcing » Mon Sep 16, 2019 11:50 am

The Innokin I.O Kit delivers big vape satisfaction from a very little pen-style kit made of stainless steel. Thanks to the ultra-slim design, it can easily fit in the palm of your hand. The kit is powered by an integrated 310mAh rechargeable battery, which can be charged via the bottom micro USB charging port and features onboard safety protections. Adopting puff activated on/off switch, it is very easy to use even for beginners. The Innokin I.O has a refillable capacity of 0.8ml and two pods - 1.4ohm ceramic coil and 1.4ohm Kanthal coil, to fit different juice. Simply inhale to vape the I.O, each puff will deliver fantastic flavour from either nic-salt, freebase or CBD e-liquid.

Image

Parameters:
Size: 87.45 × 13.9 × 8mm
E-juice Capacity: 0.8ml
Battery: Built-in 310mAh
Coil: 1.4ohm Kanthal coil, 1.4ohm ceramic coil
Wattage Range: 5.5 - 8.5W
Body Material: Stainless steel
On/Off: Puff activated

More information you can see https://vapesourcing.com/innokin-i-o-kit.html

Also you can consider:
geekvape aegis x cost

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

Damn Vape Diamond RTA: Combine MTL Function for Great Flavor

Post by vapesourcing » Tue Sep 17, 2019 6:28 am

Glad to introduce the excellent Damn Vape Diamond RTA! Inherited from Damn Vape family, the Diamond RTA is a wonderful rebuildable tank with 22mm diameter and 2ml e-juice capacity (a 3.5ml extra bubble glass included). With two post decks and none-diffusion airflow system for easy coil build and optimal flavor, the Diamond RTA perfectly combines the MTL function together to meet your most vaping need.

It comes with improved Kayfun Lite style airflow system, you can adjust the airflow from the side without unscrewing the atty, no airflow-ring, no diffusion, no worries about changing your favorite setting by accident. With Φ1.5mm center airflow hitting coil, traveling through compact cone-shape chamber and small chimney, you'll get outstanding flavor and perfect throat hit. Perfect for salt nicotine or regular nicotine juice, the Diamond MTL RTA is definitely a wonderful RTA for DIY lovers.

Image

Parameters:
Material: Stainless steel
Size: 22 × 39mm (including drip tip)
Tank Capacity: 2ml/3.5ml (bubble glass)
Drip Tip: 510 Delrin
Recommended Coil ID: 2.5mm/3.0mm

More information you can see https://vapesourcing.com/damn-vape-diamond-rta.html

You may also like:
dovpo blotto rta

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

New Launch | 20W Pavinno Wing Pod System Kit

Post by vapesourcing » Tue Sep 17, 2019 6:54 am

Hey guys. Have you ever used a pod system that can be controlled by APP? Today let's first look at such a pod system named Pavinno Wing. It is in stock in the vapesourcing online store, don't miss if you like.

Pavinno Wing Vape Kit is an intelligent open pod system that offers a multitude of customization options via a mobile app. With a smooth-to-the-touch leather accent, it was designed to maximize comfort. Powered by a built-in 720mAh LiPo battery, the Wing presents a svelte buttonless design that uses a simple draw-to-fire system. An LED indicator light will keep you updated of battery status with just a glance. As for the pod, it can hold up to 2.5ml of e-liquid and can be easily refilled via the dual filling ports. The heating element inside the pod is a ceramic coil that has a resistance of 1.2 ohms, very suitable for nic salts.
Image
The highlight of the Wing is the mobile app. It allows users to adjust the wattage in a range of 5-20W (in 1W increments) and will also display the approximate resistance of the pod, a puff counter, real-time firing duration gauge, Smart Effect (uses dynamic algorithms to adjust relevant settings according to the device's settings to provide the best taste possible). Moreover, it even allows users to adjust a power curve which gives 10 different bars that allow the user to change the wattage every second so you can truly fine tune the device to your preference. Anyway, the Pavinno Wing is definitely worth a shot.

Where to buy: https://vapesourcing.com/pavinno-wing-kit.html

Parameters
Composition Material: Zinc alloy chassis+Faux leather inlay
Dimensions: 99.2mm * 27.9mm * 13.3mm (without pod installed)
Battery: 720mAh internal LiPo battery
Eliquid Capacity: 2.5ml
Coil Type: 1.2ohm ceramic heating element
Power output range: 5-20W
Temp control range: 212-600°F / 100-315°C

You may also like: drag nano near me

vapesourcing
veteran
Posts: 1303
Joined: Tue Mar 06, 2018 5:26 am
China

First Look | Steam Crave Glaz Mini MTL RTA

Post by vapesourcing » Tue Sep 17, 2019 11:42 am

Guys, good day! Have you ever done some MTL vaping without pod system kits? This time we'll be covering the Glaz Mini---a new MTL RTA by Steam Crave. Just buy from the vapesourcing online china vape shop if you like.

Steam Crave Glaz Mini MTL RTA is a magical rebuildable atomizer with flexibly switchable capacity. Measuring 23mm in diameter, it has a normal e-juice capacity of 2ml. But if the extension part included in the package is used, it can store up to 5ml, capable of rewarding your passion for an enduring vaping. The specially designed drip tip can effectively dissipate heat, so you won't burn your mouth.
Image
Refilling is effortless thanks to the 4 big top filling ports under the twist-to-open top cap. Inside the RTA, there is an uplifted deck with two posts for easy single coil building. At last, you can twist the AFC ring on the bottom to expose different-sized air holes for a dense or thin vapor effect according to whether you prefer a mild or intense taste. All in all, the Glaz Mini is a good choice for DIY MTL vaping.

Where to buy: https://vapesourcing.com/steam-crave-glaz-mini-rta.html

Parameters
Diameter: 23mm
Capacity: 5ml(extension) / 2ml(Standard)
Type: Single Coil RTA
Drip tip: 510 drip tip
Thread: 510
Refill: Top-filling
Airflow: Buttom airflow
Four air holes: 0.8mm, 1mm, 1.2mm, 1.6mm

You may also like: vaporesso gen mod cena

Post Reply